ARC-126MDB User Manual

Loading ...

WATER DRAINAGE

The dehumidifying capacity of this unit is 61 pints per day.

The patented self-evaporating function of the ARC-126MDB

unit fully exhausts all condensation automatically in most en-

vironments when humidity is less than 70%. Areas with more

than 70% humidity, the self-evaporating function can still ex-

haust about 98% of the moisture and the remaining 2% of

moisture will be collected in the water tank of the air condi-

tioner.

When the water reservoir reaches its maximum level, the unit

will beep 8 times and the digital display will show P1. When

the unit displays P1, all operation modes will be disabled

temporarily, while the fan continuously running. The P1 code

will disappear when the water is completely drained.

• Manual drainage (Fig. 1a)

Carefully move the unit to a drain location or position a flat

container, dish or optional drain bucket accessory (sold

separately) under the drain area of the lower drain port.

Remove the bottom drain plug and let the water drain.

Replace the drain plug and plug in to resume operation.

• Continuous drainage (Fig. 1b)

Remove the upper drain plug from the back of the unit and

install the drain hose. Place the open end of the hose to a

drain area. This method is recommended if uninterrupted op-

eration is desired.

Remove bottom

drain plug for

Manual Drainage

Attach drain hose

for Continuous

Drainage

Fig. 1a

Fig. 1b

INSTALLATION

WARNING: NEVER OPERATE THE AIR CONDITIONER

WIT

HOUT THE AIR FILTER

AIR FILTERS

• Silvershield Pre-filter and Intake Hose Pre-Filter

This portable air conditioner is equipped with a

Silvershield pre-filter and intake hose pre-filter, which removes

large particles such as dust, pet hair and dander. These pre-

filters can be removed for cleaning by pulling the filter back

and out. Both pre-filters are washable and do not need to be

replaced.

• 3M™ Antimicrobial High Air Flow Filter

This portable air conditioner comes with the 3M™ Antimicrobial

High Air Flow Filter which is designed to remove particles such

as dust, pet hair and dander, antimicrobial agent helps inhibit

the growth of mold and mildew, and the micro-structured elec-

trostatically charged filtration media traps and retains particles.

The 3M

Filter is pre-installed.

Note: The 3M Filter should be replaced every 2-3 months de-

3M Filter

Intake Hose pre-filter

Silvershield Filter

Loading ...

User Manual - Page 9