Loading ...
Loading ...
Loading ...
7
PARTS IDENTIFICATION
Leakage-Curre
nt Detection and Interruption (LCDI)
Operating Conditions
Mode Room Temperature
Cool
Higher than 64°F
Dry
Higher than 60°F
Your portable air conditioner is supplied with a Leakage-Current Detection and Interruption (LCDI)
plug. This plug reduces the risk of fire due to arcing faults in the power supply cord. Please follow
the instructions below to ensure that LCDI plug works properly.
1. Plug the power cord to a grounded wall outlet. Do not plug to a power strip or extension cord.
2. Press the TEST button on the plug. This should trip the plug and cut the power to the air condi-
tioner. If the plug does not trip and the unit comes on, please contact technical support.
3. Press the RESET button to start the air conditioner.
4. Do NOT use the TEST and RESET buttons to turn the air conditioner on and off.
ACCESSORY IMAGE ACCESSORY DESCRIPTION QUANTITY
Exhaust and intake hose adapters to the unit 1 set
Exhaust and intake hose 1 each
Exhaust and intake hose adapters to the window
1 s
et
Window Slider Kit 1 set
Clear plastic plug (plug is in the upper corner of
the plastic bag that holds the user manual)
1 piece
Foam seal A (Adhesive)
Foam seal B (Adhesive)
Foam seal C (Non-adhesive)
2 pieces
2 pieces
1 piece
Security bracket with 2 screws 1 set
Drain hose 1 piece
3M Filter (pre-installed on unit) 1 piece
Silvershield pre-filter (pre-installed on unit) 1 piece
Intake hose pre-filter (pre-installed on unit)
1 piece
Storage Cover (sold separately)
1 piece
Loading ...
Loading ...
Loading ...