Loading ...
Loading ...
Loading ...
Attach the tether strap hook to the
anchor as shown above, then
tighten the strap according to the
child seat maker’s instructions.
Make sure the strap is not twisted.
Followsteps1and2ofthesecond
row seat installation.
There are three anchorage points on
the tailgate sill. The tether hardware
is installed on the center anchorage
point.
If you want to use either of the
outside anchorage points shown
above, remove the tether
hardware from the center
anchorage point on the tailgate sill.
With a flat tipped screwdriver,
remove the plug from the
anchorage point you intend to use,
then install the tether hardware.
Make sure the toothed washer is on
the bottom of the bolt. Tighten the
bolt to:
To attach the tether to the child
seat, follow the child seat maker’s
instructions.
If you did not use a torque wrench,
or you are not sure how to install the
tether or the hardware, contact your
Honda dealer for assistance.
2.
2.
1.
3.
4.
Installing a Child Seat
Driver and Passenger Safety
Third Row Installation
49
16 lbf·ft (22 N·m , 2.2 kgf·m)
Main Menu
Table of Contents
Loading ...
Loading ...
Loading ...