Loading ...
Loading ...
Loading ...
Both front seats are equipped with
seat heaters. The ignition switch
must be in the ON (II) position to
use them. The seat heater switch is
located on each front door. Push the
front of the switch, HI, to rapidly
heat up the seat.
After the seat reaches a comfortable
temperature, select LO by pushing
the back of the switch. This will keep
the seat warm.
In HI, the heater turns off when the
seat gets warm, and turns back on
after the seat’s temperature drops.
In LO, the heater does not cycle with
temperature change.
Follow these precautions when using
the seat heaters:
Use the HI setting only to heat the
seats quickly, because it draws
large amounts of current from the
battery.
Because of the sensors for the side
airbag system, there is no heater in
the passenger’s seat-back.
If the engine is left idling for an
extended period, do not use the
seat heaters, even on the LO
setting. It can weaken the battery,
causing hard starting.
On EX-L model
Seat Heaters
Instruments and Controls
98
Main Menu
Table of Contents
Loading ...
Loading ...
Loading ...