Loading ...
Loading ...
Loading ...
If your vehicle’s battery is
disconnected or goes dead, or the
driver’s window fuse is removed, the
AUTO function will be disabled. The
power window system needs to be
reset after reconnecting the battery
or installing the fuse.
Start the engine. Push down and
hold the driver’s window switch
until the window is fully open.
Pull and hold the driver’s window
switch to close the window
completely, then hold the switch
for a second or two more.
If the power windows do not operate
properly after resetting, have your
vehicle checked by a Honda dealer.
The power window system has a key-
off delay function. The windows will
stilloperateforupto10minutes
after you turn off the ignition.
Opening either front door cancels
the delay function. You must turn
the ignition switch to ON (II) again
before you can operate the windows.
Youcanopenorcloseeachrear
window with the switches on the
driver’s door armrest. The right
switch controls the passenger’s side
rear window, and the left switch
controls the driver’s side window. To
open the window, push the switch
downandholdit.Releasetheswitch
when you want the window to stop.
Close the window by pulling back on
the switch and holding it.
1.
2.
Power Windows
Instruments and Controls
101
REAR WINDOW SWITCHES
Main Menu
Table of Contents
Loading ...
Loading ...
Loading ...