Loading ...
Loading ...
Loading ...
32 33
TM
TM
Neato Botvac
™
User Manual Neato Botvac
™
User Manual
BATTERIES AND
CHARGE BASE
BATTERY SWITCH
Botvac is shipped from the factory with the battery switch in the
OFF position to extend battery life.
To connect the battery, open the dirt bin and push the ON/OFF
switch DOWN to ON.
ON/OFF Switch:
• You push the ON/OFF switch UP to turn OFF the robot.
• You push the ON/OFF switch DOWN to turn ON the robot.
Tip! If you will not be using Botvac for an extended period
of time, you can extend the life of the battery by pushing the
battery switch in the dirt bin UP to OFF.
10
ON/OFF switch
CHARGE BASE LOCATION
Choose a wall outlet that has a 3’ (1 m) clearance on both sides
and in front of the charge base. This helps your Botvac find its
charge base.
BATTERY CHARGE TIME
Botvac takes two to three hours to charge fully. The status
light turns solid green when the batteries are completely
charged. Several factors influence charging time.
• The charge level of the battery: If the battery is almost
drained, charging will take closer to three hours. If partially
charged, it will take less time to reach full capacity.
• The environment of the room: It will charge faster on a hard
surface located in a cool dry area. On hot days, on carpet,
expect longer charging times.
We recommend you charge the batteries overnight before you use
Botvac for the first time. Run through three complete charging
cycles to optimize the performance of the batteries.
Loading ...
Loading ...
Loading ...