Loading ...
Loading ...
Loading ...
19CLEANING
Cleaning your oven accessories
Removing the trays and shelves from your appliance
• Slide the dish and shelves towards you until they
reach the front stop.
• Tilt them up at the front to clear the side supports,
taking care not to spill the contents.
• For separate grill underbench model (WVG655),
open the grill door and pull out the grill slide to its full
extent. Carefully lift the dish from the support.
• Lift the dish and shelves clear.
• Wash the dish, insert and shelves in hot soapy water.
• Reverse the above steps to put the grill tray and
shelves back again.
• Ensure that they are placed between the 2
support wires.
WARNING
CAUTION
Do not remove the slide mechanism on the separate grill
underbench model (WVG655). The grill dish can easily
be removed for cleaning.
Removing the side racks (shelf supports)
• Grasp the shelf supports at the front.
• Pull them firmly inwards.
• After cleaning, reinstall the side racks by inserting the
rear pins first.
Releasing the grill element
WARNING
WARNING
Make sure the appliance is turned off before you remove
or replace parts, to avoid the possibility of electric shock.
The upper grill element is secured with a hanger clip
which can be removed to help clean the oven cavity
ceiling. To remove the hanging clip push the sides of the
clip in the direction of the arrows. After cleaning raise the
grill element and secure clip back into position.
NOTE: Diagram shows a grill in oven model. Separate grill
models use the same hanger clip arrangement in the grill
compartment.
Loading ...
Loading ...
Loading ...