Loading ...
Loading ...
Loading ...
8
SLIDE TO LOCK /
UNLOCK BATTERY
SHIP BATTERY INSTALLATION
NOTE: The ship has no on/o switch , and
automatically turns on when the Li-poly battery is
connected. To switch o simply unlock, and remove
the battery.
1. During your rst installation, slide the clasp to the unlocked position (as shown
in illustration) to unlock the battery. Next, remove the battery cover that comes in
the package, as this cover is cosmetic and used for display purposes only.
2. Slide the fully-charged battery into the ship’s battery compartment (see diagram).
3. Push down and make sure the battery is fully seated as shown below. The ship’s
LED lights will illuminate and start ashing when the battery is properly connected.
4. Close the clasp to lock the battery securely in place.
FIRST INSERT THE NOSE
OF THE BATTERY AT A
FORWARD ANGLE, NEXT
PUSH THE BACK OF THE
BATTERY DOWN
Loading ...
Loading ...
Loading ...