Loading ...
Loading ...
Loading ...
7-61
7
Maintenance
• Always handle them carefully, and
avoid scratches and abrasions. If
the bulbs are lit, avoid contact with
liquids.
• Never touch the glass with bare
hands. Residual oil may cause the
bulb to overheat and burst when lit.
• A bulb should be operated only
when installed in a headlamp.
• If a bulb becomes damaged or
cracked, replace it immediately
and carefully dispose of it.
Information
The headlamp aiming should be
adjusted after an accident or after the
headlamp assembly is reinstalled at an
authorized HYUNDAI dealer.
Information
Traffic Change (For Europe)
The low beam light distribution is
asymmetric. If you go abroad to a
country with opposite traffic direc-
tion, this asymmetric part will dazzle
oncoming car driver. To prevent daz-
zle, ECE regulation demand several
technical solutions (ex. automatic
change system, adhesive sheet, down
aiming). This headlamps are designed
not to dazzle opposite drivers. So, you
need not change your headlamps in a
country with opposite traffic direc-
tion.
Headlamp (Low)
1. Open the hood.
2. Disconnect the negative battery
cable.
3.Remove the bulb cover (1) by turn-
ing it counterclockwise.
4.Disconnect the bulb socket-con-
necter.
5.Remove the bulb from the head-
lamp assembly.
6.Install a new bulb.
7.Connect the bulb socket-connec-
tor.
8.Install the bulb cover (1) by turning
it colckwise.
i
i
OAEE076039
Loading ...
Loading ...
Loading ...