User Manual - Page 99

For 212X 2019 LBT1050A-U.

Loading ...
Loading ...
Loading ...
Instrument operation
92
NOTICE
If the cause of overheating cannot be
found and corrected, take special precau-
tions to avoid major engine damage while
you return to shore.
Single engine overheating — Shut off the
overheating engine and use the properly
running engine to return to shore. Operate
at no-wake speed (8 km/h, 5 mph) to pre-
vent water from flooding the non-operat-
ing engine through the water intake. See
page 87 for information on the no-wake
mode.
Both engines overheating — If getting a
tow from another vessel is not possible,
operate both engines just slightly above
idle while you return to shore. If you can be
towed, refer to “Towing the boat” on page
189.
House/Start Battery voltage warning
If “House/Start Battery” appears on the multi-
function display and the buzzer will sound,
check the battery connections. If the battery
connections are clean and tight and the
warning indication continues, have a Yamaha
Boat Dealer check the charging system.
Communication error warning
If a communication error is detected for the
GPS function, a sensor, or other device, a
warning will appear on the multi-function dis-
play and the buzzer will sound. If this occurs,
reduce the engine speed, return to shore, and
have a Yamaha Boat Dealer check the boat.
Low fuel level warning
If “Fuel” appears on the multi-function dis-
play and the buzzer will sound, refill the fuel
tank as soon as possible. (See page 124 for
information on filling the fuel tank.)
Depth warning
If the boat enters an area that is shallower
than the water depth set for the depth alarm,
the depth warning will be activated and the
buzzer will sound.
If the warning is activated, move the boat to
an area that is deeper than the water depth
set for the depth alarm. (See page 85 for in-
formation on setting the depth alarm.)
SportsBoat_F3R12.book Page 92 Thursday, June 21, 2018 10:45 AM
Loading ...
Loading ...
Loading ...