User Manual - Page 149

For 212X 2019 LBT1050A-U.

Loading ...
Loading ...
Loading ...
Pre-operation checks
142
212 Limited
1 Bow light
2 Anchor light
(3) Tap the “Navigation” button, and then
check that the bow light and anchor light
go off.
(4) Tap the “Anchor” button, and then check
that only the anchor light comes on.
(5) Tap the “Anchor” button, and then check
that the anchor light goes off.
(6) 212 Limited: Remove the anchor light.
Horn check
Push the horn switch/button and check that
the horn sounds.
AR210 / SX210
1 Horn switch
212X / 212 Limited S / 212 Limited
1 Horn button
Engine shut-off cord (lanyard) check
Make sure that the engine shut-off cord (lan-
yard) is not damaged. If the cord is damaged,
replace it. WARNING! Never try to repair
the engine shut-off cord (lanyard) or tie it
together. The engine shut-off cord (lan-
yard) may not pull free when the operator
falls off, allowing the boat to continue to
run and cause an accident.
Post-launch checks
Perform the post-launch checks in the pre-
operation checklist while the boat is in the
water and the engines are running.
Engine shut-off switch check
Check the engine shut-off switch for proper
operation.
1
2
BILGE
NAVI
ANC
HORN
CTSY
LIGHTS
1
HORN
1
SportsBoat_F3R12.book Page 142 Thursday, June 21, 2018 10:45 AM
Loading ...
Loading ...
Loading ...