Loading ...
Loading ...
Loading ...
English 27
Troubleshooting
Problem Possible cause Action
The display
goes blank.
The electrical
outlet Ground Fault
Interrupter (GFI or
GFCI) has been tripped
and needs to be reset.
Your digital control has
been damaged.
Replace the fuse or reset the circuit
breaker.
Food does not
bake or roast
properly in the
oven.
The wrong cooking
mode is selected.
See page 15.
The oven racks have
not been positioned
properly for the foods
being cooked.
See page 16.
Incorrect cookware or
cookware of improper
size is being used.
See page 12.
The oven thermostat
needs adjustment.
See page 19.
There is aluminum foil
on the racks and/or
oven bottom.
Remove the foil.
The clock or timers are
not set correctly.
See page 11.
Food does not
broil properly in
the oven.
The oven controls are
not set properly.
See page 15.
The oven door was not
closed during broiling.
See page 15.
The rack has not been
properly positioned.
See the broiling guide page on 16.
Problem Possible cause Action
Steam or smoke
is coming from
under the
control panel.
This is normal. The oven vent is located there.
More steam is visible when using
the convection functions or when
baking or roasting multiple items at
the same time.
Burning or oily
odor coming
from the vent.
This is normal for a
new oven and will
disappear within
1/2 hour of the rst
bake cycle.
To speed the process, remove all
food from the oven, and then set it
to Bake at 550 °F for a minimum of
1 hour.
Strong odor. This is temporary. The insulation around the inside of
the oven emits an odor the rst few
times the oven is used.
The oven racks
are difcult to
slide.
This is normal. Apply a small amount of vegetable
oil to a paper towel and wipe the
edges of the oven racks with the
paper towel.
Others
Problem Possible cause Action
The product is
not level.
The appliance has been
installed improperly.
The leveling leg(s)
is (are) damaged or
uneven.
Make sure the oor is level, strong,
and stable. If the oor sags or
slopes, contact a carpenter.
Check and level the range. (See the
Installation Instructions.)
The kitchen cabinets
are not properly
aligned and make the
range appear to be not
level.
Ensure that cabinets are square
and provide sufcient room for
installation.
NX58K3310SS_AA_AC_DG68-00773A-04_EN+MES+CFR.indb 27 2/1/2018 5:18:56 PM
Loading ...
Loading ...
Loading ...