Loading ...
Loading ...
Loading ...
13
Programming Brew Temperature (187° – 192º F)
The Brewer brews at a preset temperature of 192°. You can adjust this
temperature down by 5 degrees if you prefer a cooler cup of coffee, tea
or hot cocoa. Simply follow the instructions below.
1. Press the Menu Button on the LCD Control Center five times to
program the Brew Temperature feature.
2. The LCD Control Center will now display the programming options with
a small arrow next to “SET BREW TEMP” (fig. 15). Also, the temperature
192° (initial setting) will be displayed at the bottom of the LCD Control
Center to indicate the current temperature setting.
3 . A minus sign will appear over the Small Cup Button and/or a plus sign
over the Large Mug Button. Use these buttons to raise or lower the
temperature one degree at a time.
4. Once you have reached your desired brew
temperature, press the Menu Button once
to exit the programming mode. “BREW TEMP
SET” will be displayed in the LCD Control
Center if you have changed it from 192°.
5. To change the brew temperature again, repeat
steps 1 through 3 to change the temperature
up or down, remembering that the temperature
can only be between 187° and 192° .
Cleaning External Parts
Regular cleaning of the Brewer’s external components is recommended.
1. Never immerse the Brewer in water or other liquids. The Housing
and other external components may be cleaned with a soapy, damp,
non-abrasive cloth.
2. The Drip Tray can accumulate up to 8 ounces of overflow. The Drip Tray
and Drip Tray Plate should be periodically inspected and rinsed clean.
To remove the Drip Tray Assembly, simply slide it toward you, keeping it
level at all times to avoid spilling. The Drip Tray and Drip Tray Plate are
dishwasher safe.
Cleaning the K-Cup Holder Assembly
1. Cleaning the Parts —The K-Cup Holder
Assembly is dishwasher safe. NOTE: Use low
temperature cycles in the dishwasher.
To remove
from the Brewer, open the cover by lifting the
Handle. Grasp the top of the K-Cup Holder with
one hand while pushing up on the bottom of the
K-Cup Holder from underneath with the other
until it releases (fig. 16). After cleaning, align
the K-Cup Holder with the opening using the
two front ribs as a guide, and snap into place
from the top.
SECTION 3 Cleaning & Maintenance
SECTION 2 Controls & Indicators (LCD Control Center)
12
192°
CLOCK
AUTO OFF
ON OFF TIME
SET BREW TEMP
MENU
fig.
15
fig.
16
Loading ...
Loading ...
Loading ...