Loading ...
Loading ...
Loading ...
8 INSTALLATION
INSTALLATION
Tools Needed
Pliers Flat-blade
Screwdriver
Level
Product Specifications
The appearance and specifications listed in this manual may vary due to constant product improvements.
Model
WT7100C*
WT7250C*
WT7300C*
WT7800C*
WT7900H*A
Electrical requirements 120 VAC @ 60 Hz
Min. / Max. water pressure 20 - 120 psi (138 - 827 kPa)
Dimensions
27" (W) X 28
3
/8" (D) X 44
1
/2" (H), 57
1
/4" (H with lid (door) open)
68.6 cm (W) X 72.1 cm (D) X 113 cm (H), 145.3 cm (H with lid (door) open)
Net weight 127.9 lbs (58.0 kg) 132.3 lbs (60.0 kg)
Max spin speed 950 RPM (±50 rpm)
WARNING
Moving or installation of the appliance requires two or more people. Failure to follow these instructions may
result in injury.
Store and install the appliance where it will not be exposed to temperatures below freezing or exposed to
outdoor weather conditions. Failure to follow this warning can cause product or part failure, serious injury,
fire, electric shock, or death.
Properly ground the washer to conform with all governing codes and ordinances. Failure to follow this
warning can cause serious injury, fire, electric shock, or death.
To reduce the risk of electric shock, do not install the appliance in humid spaces. Failure to follow this
warning can cause serious injury, fire, electric shock, or death.
To ensure proper airflow, do not block the large opening on the bottom of the washer with carpeting or other
materials.
Do not remove the ground prong. Do not use an adapter or extension cord. Plug into a grounded 3-prong
outlet. Failure to follow this warning can cause serious injury, fire, electric shock, or death.
Certain internal parts are intentionally not grounded and may present a risk of electric shock only during
servicing. Service personnel-do not contact the following parts while the appliance is energized. : pump,
motor, noise filter cover, and heater (on applicable models).
Loading ...
Loading ...
Loading ...