Loading ...
Loading ...
Loading ...
33
Mounting the extensible cover plate
Run the power supply so that it fits inside the cover
plate.
Adjust the mounting plate by pulling it apart or push-
ing it together so that it fits the cover plate.
Then screw the mounting plate to the wall (A).
Screw the cover plate to the mounting plate (B).
If installing as in alternative B (outdoor venting), you
must now fit an approved ventilation tube that can
be purchased from the same store as the cooker
hood. Fit following the instructions included with the
tube. Connect the ventilation tube to the connecting
flange of the cooker hood (C).
NB:
If the cooker hood is installed as in alternative A
(circulating indoor air), the charcoal filter available for
purchase from your dealer must be fitted.
High ceiling?
If the ceiling is higher than 2.60-2.70 metres, for cer-
tain models you can order a chimney extender for
ceiling heights up to 3.5 metres.
AU:
Loading ...
Loading ...
Loading ...