Loading ...
Loading ...
Loading ...
27
Setting Oven Controls
Adjusting oven temperatures
Your appliance has been factory calibrated and tested to ensure
an accurate baking temperature. For the first few uses, follow
your recipe times and temperature recommendations carefully.
If you think the oven is cooking too hot or too cool for your
recipe times, you may adjust the control so the oven cooks hotter
or cooler than the oven temperature displayed.
The oven temperature may be increased as much as +35°F
(+19°C) or decreased -35°F (-19°C) from the factory calibrated
settings.
To increase (+) or decrease (-) the oven temperature by 20°F:
1. Press and hold Bake until the control provides the 2 audible
tone (about 6 seconds).
2. Enter 2 0 using numeric keypad.
3. Press Self Clean to toggle between plus (
+) if increasing
temperature or minus (
-) if decreasing the temperature.
4. Press to accept change.
Important note:
• Oven temperature adjustments made will not change the
Broil or Self Clean function temperatures.
• If the temperature shows an adjustment of -20°F, and a
+20°F adjustment is needed, you can toggle between the
minus (-) or plus (+) in the display by pressing Self Clean.
• DO NOT USE oven thermometers such as those found in
grocery stores to check the temperature settings inside your
oven. These oven thermometers may vary as much as 20 to
40°F degrees from actual temperatures.
• The oven temperature adjustment may be made if your
oven control has been set to display °C (Celsius) tempera-
tures. Minimum and maximum settings for Celsius is plus (+)
or minus (-) 19°C.
Restoring factory default settings
When new, your appliance left the factory with predetermined
oven control settings. Over time, the user may make changes to
these default settings. The following options have user settings
that may be modified and may have been set with changes
since the appliance was new:
• 12 or 24 hour display mode
• Continuous bake or 12-Hour Energy Savings mode
• Silent or audible control
• Oven temperature display (Fahrenheit or Celsius)
• Oven temperature adjustments
• Stored recipes
If you choose to restore to factory default
settings, ALL of the above user settings will be restored to
factory default settings, the oven temperature offset will reset
and any stored recipe information will be cleared.
To restore oven control to factory default settings:
1. Press and hold the 7 key until acceptance tone sounds
(about 6 seconds).
2. Press . The control has been reset with the default
settings.
Loading ...
Loading ...
Loading ...