Loading ...
Loading ...
Loading ...
SECTION 5 Warranty
Limited One Year Warranty
Keurig
®
warrants that your Brewer will be free of defects in materials or
workmanship under normal home use for one year from the date of purchase.
It is recommended that you fill out and return the warranty card enclosed
with your Brewer so that your purchase information will be stored in our
system. Keurig will, at its option, repair or replace the Brewer without charge
upon its receipt of proof of the date of purchase. If a replacement Brewer is
necessary to service this warranty, the replacement Brewer may be new or
reconditioned. If a replacement Brewer is sent, a new limited one year
warranty will be applied to the replacement Brewer.
This warranty only applies to Brewers operated in the United States and
Canada. This warranty gives you specific legal rights, and you may also have
other rights that vary from state to state and, in the case of Canada, from
province to province.
What is not covered by the Limited Warranty?
THIS WARRANTY DOES NOT COVER CONSEQUENTIAL OR INCIDENTAL
DAMAGES SUCH AS PROPERTY DAMAGE AND DOES NOT COVER
INCIDENTAL COSTS AND EXPENSES RESULTING FROM ANY BREACH
OF THIS WARRANTY, EVEN IF FORESEEABLE. Some states or provinces
do not allow the exclusion or limitations of incidental or consequential
damages, so the above limitation or exclusion may not apply to you
depending on the state or province of purchase.
Nor does this warranty cover damages caused by services performed by
anyone other than Keurig or its authorized service providers, use of parts
other than genuine Keurig parts, or external causes such as abuse, misuse,
inappropriate power supply or acts of God.
Other Limitations
THIS WARRANTY IS EXCLUSIVE AND IS IN LIEU OF ANY OTHER EXPRESS
WARRANTY, WHETHER WRITTEN OR ORAL. IN ADDITION, KEURIG HEREBY
SPECIFICALLY DISCLAIMS ALL OTHER WARRANTIES WITH RESPECT TO
YOUR B70 BREWER, INCLUDING ANY IMPLIED WARRANTY OF MERCHANT
ABILITY OR FITNESS FOR ANY PARTICULAR PURPOSE. Some states or
provinces do not allow disclaimers of such implied warranties or limitations
on how long an implied warranty lasts, so the above limitation may not apply
to you depending on the state or the province of purchase.
How do you obtain warranty service?
Keurig Brewers are high-quality appliances and, with proper care, are
intended to provide years of satisfying performance. However, should the
need arise for warranty servicing, simply call Keurig Customer Service at
our toll free phone number 1.866.901.BREW (2739). Please do not return your
Brewer for servicing without first speaking to Keurig Customer Service to
obtain an Authorization to Return number (ATR). Keurig Brewers returned
without an ATR number will be returned to the sender without servicing.
Keurig, Incorporated
55 Walkers Brook Drive
Reading, MA 01867
1.866.901.BREW (2739)
17
SECTION 4 Troubleshooting
16
Situation
Brewer does not
have power
Brewer will not brew
Chlorine or mineral
taste in coffee
Solution
• Plug Brewer into an independent outlet.
• Check to be sure that it is plugged in securely.
• Plug into a different outlet.
• Reset your home’s circuit breaker if necessary.
• Make sure that the Power Switch has been
turned on and LCD lights are illuminated.
• After placing the K-Cup
®
in the K-Cup Holder, make
sure the Handle is pushed down securely and the
LCD Control Center reads “READY TO BREW” with
the Left, Right and BREW Buttons flashing, then
press the Left, Right or BREW Button.
• If the LCD Control Center indicates “ADD
WATER”, add water to the Water Reservoir or
make sure the Water Reservoir is seated properly
in its base.
• If the LCD Control Center indicates “ADD WATER”
even after refilling, contact Customer Service at
1.866.901.BREW (2739).
• The Exit Needle may be clogged (refer to page 14).
• Consider using bottled water, filtered water
or the Keruig
®
Water Filter Starter Kit
(available at www.keurig.com).
Situation
Brewing a partial cup
The time is not
displayed on the LCD
Message Center
Brewer shuts
off or turns on
automatically
The blue light in Water
Reservoir is flashing
Solution
• The Exit Needle may be clogged (refer to page 14).
• Clean the K-Cup Holder Assembly if necessary
and rinse under faucet (refer to page 13).
• The Water Reservoir may have been removed
during brewing. Replace the Water Reservoir
and perform a water brew without a K-Cup.
• “De-Scale” the Brewer (refer to page 14 ).
• If you have repeated the de-scale procedure on
your Brewer two times and it is still only brewing
a partial cup, contact Customer Service at
1.866.901.BREW (2739).
• The time will not be displayed on the LCD
unless you have set it. To set the clock, follow the
procedure on page 10.
• If power is interrupted to the Brewer, you will
need to set the clock again using the procedure
on page 10.
• Check to make sure that the Auto Off timer
and/or On/Off time features have not been set. To
do this, press the MENU Button below “MENU”
and scroll through the programming options.
“OFF” should be displayed for Auto Off timer and
On/Off. If “OFF” is not displayed, follow
directions on page 11 to reset.
• The water level is low and a full cup cannot be
brewed. Add water to Water Reservoir
If any problems persist, contact Customer Service at 1.866.901.BREW (2739)
Loading ...
Loading ...
Loading ...