Loading ...
Loading ...
Loading ...
22
CONV ROAST* (Convection Roast)
The convection element runs in conjunction with the inner and outer broil elements. The
reversible convection fan runs at a higher speed in each direction. This transfer of heat (mainly
from the convection element) seals moisture inside of large roasts. A time savings is gained
over existing, single fan convection roast modes. Use this setting for whole turkeys, whole
chickens, hams, etc.
*Note: This function uses a high-speed convection fan for optimum cooking
performance. Some noise may be noticed from this high fan speed. This is normal.
Note: You can also roast foods using bake settings. See the “Baking” section for additional information.
Roasting Tips
ALWAYS
use a broiler pan and grid. The hot air must be allowed to circulate around the item being roasted. DO NOT cover what is being
roasted. Convection roasting seals in juices quickly for a moist, tender product. Poultry will have a light, crispy skin and meats will be
browned, not dry or burned. Cook meats and poultry directly from the refrigerator. There is no need for meat or poultry to stand at room
temperature.
• As a general rule, to convert conventional recipes to convection recipes, reduce the temperature by 25°F (14°C) and the cooking time by
approximately 10 to 15%.
•
ALWAYS
roast meats fat side up in a shallow pan using a roasting rack. No basting is required when the fat side is up. DO NOT add water
to the pan as this will cause a steamed effect. Roasting is a dry heat process.
• Poultry should be placed breast side up on a rack in a shallow pan. Brush poultry with melted butter, margarine, or oil before and during
roasting.
• For convection roasting, DO NOT use pans with tall sides as this will interfere with the circulation of heated air over the food.
• If using a cooking bag, foil tent, or other cover, use the conventional bake setting rather than either convection setting.
• When using a meat thermometer, insert the probe halfway into the center of the thickest portion of the meat. (For poultry insert the
thermometer probe between the body and leg into the thickest part of the inner thigh.) The tip of the probe should not touch bone,
fat, or gristle to ensure an accurate reading. Check the meat temperature halfway through the recommended roasting time. After reading
the thermometer once, insert it
1
⁄2 inch (1.3 cm) further into the meat, then take a second reading. If the second temperature registers
below the first, continue cooking the meat.
• Roasting times
ALWAYS
vary according to the size, shape and quality of meats and poultry. Less tender cuts of meat are best prepared in
the conventional bake setting and may require moist cooking techniques. Remove roasted meats from the oven when the thermometer
registers 5°F (3°C) to 10˚ F (6°C) lower than the desired doneness. The meat will continue to cook after removal from the oven. Allow
roasts to stand 15 to 20 minutes after roasting in order to make carving easier.
Roasting (VDR/CVDR Dual Fuel Models)
Loading ...
Loading ...
Loading ...