Loading ...
Loading ...
Loading ...
24
Clogged dispensers or laundry
products dispensing too soon.
Do not overfill dispenser. Overfilling causes immediate dispensing.
Load dispensers before starting a cycle.
Homes with low water pressure may result in residual powder in the
dispenser. To avoid, select a warmer wash temperature if possible,
depending on your load.
Use only liquid chlorine bleach in the bleach compartment.
Incorrect dispenser
operation
Liquid chlorine bleach not used in
bleach compartment.
It is normal for small amounts of water to remain in dispenser at the
end of the cycle.
Water in dispenser after cycle has
finished.
If you experience
Possible Causes
Solution
First try the solutions suggested here or visit our website at www.maytag.com/product_help –
In Canada www.maytag.ca for assistance and to possibly avoid a service call.
Washer not performing as expected (cont.)
Not using correct cycle for load type.
When using the Overnight Wash & Dry or Delicates cycle, you
should wash small loads. This ensures a gentle wash for your
garments without increasing cycle times.
The Overnight Wash & Dry cycle is designed for smaller load sizes
(2–4 items) of lightly soiled garments. If larger loads are washed in
this cycle, cycle time will be increased.
Normal washer operation. The cycle times vary automatically based on your water pressure,
water temperature, detergent, and clothes load. The options you
select will also affect the cycle times.
Cycle time changes or
cycle time too long
Excessive suds in washer.
Load may be out of balance.
When excessive suds are detected, a special suds routine
automatically starts to remove extra suds and ensure proper rinsing
of your garments. This routine will add time to the original cycle.
When load unbalance occurs, a washing process will start to
redistribute the load. This may lengthen the cycle time. Avoid
washing single items. Balance a single item such as a rug or jeans
jacket with a few extra items.
TROUBLESHOOTING
Single-dose laundry
packet not dissolving
Adding laundry packet incorrectly. Be sure laundry packet is added to washer drum before adding
clothes. Do not add packet to dispenser. Follow the manufacturer’s
instructions to avoid damage to your garments.
Control Lock is on. Touch and hold CONTROL LOCK for 3 seconds to turn off Control
Lock. For each second CONTROL LOCK is held down, the display
will count down one second: you will see “3,” then “2,” then “1.”
The controls are not
responding
Loading ...
Loading ...
Loading ...