Loading ...
Loading ...
Loading ...
1414
Starting the Self-Clean Cycle
For satisfactory results, use a 2 hour Self-Clean cycle for
light soils and a 3 hour cycle for heavier soils. NOTE:
The kitchen area should be well ventilated using an open
window, ventilation fan or exhaust hood during the 1st
Self-Clean cycle. This will help eliminate the normal odors
associated with the 1st Self-Clean cycle.
To Set the Controls for a Self-Clean Cycle:
1. Be sure the clock shows the correct time of day.
2. Press . “— — —” appears in the display.
3. Press the or once. “3:00” appears in the
display for a 3 hour cycle. To change to a 2 hour cycle
press . “2:00” appears in the display.
As soon as the controls are set, the motor driven
lock will begin to close automatically and the “LOCK”
indicator light will ash. DO NOT open the oven door
while the light is ashing (it takes about 15 seconds
for the oven door to lock).
4. “CLn” will appear in the display during the Self-Clean
cycle and the “LOCK” light will glow until the Self-
Cleaning cycle is complete or cancelled and the oven
temperature has cooled.
SELF-CLEANING
When the Self-Clean Cycle has Completed:
1. The time of day or “End” will appear in the display
window and the “Clean” and “LOCK” light will continue
to glow.
2. Once the oven has cooled down for about 1 HOUR and
the “LOCK” light has gone out, the oven door can be
opened.
3. If “End” is in the display and the Clean indicator light
remains ON, press . The time of day will appear in
the display.
When the oven is cool, wipe away any residue or
powdered ash with a damp cloth or paper towel.
NOTE
To avoid possible burns use care when opening the oven
door after the Self-Cleaning cycle. Stand to the side
of the oven when opening the door to allow hot air or
steam to escape.
DO NOT force the oven door open. This can damage
the automatic door locking system. Use caution and
avoid possible burns when opening the door after the
Self-Cleaning cycle has completed. The oven may still
be VERY HOT.
CAUTION
Stopping or Interrupting a Self-Cleaning
Cycle
If it becomes necessary to stop or interrupt a Self-Cleaning
cycle:
1. Press .
2. Once the oven has cooled down for about 1 HOUR and
the “LOCK” light has gone out, the oven door can be
opened.
3. Restart the Self-Clean cycle once all conditions have
been corrected.
Loading ...
Loading ...
Loading ...