Loading ...
Loading ...
Loading ...
9-Troubleshooting
GB
22
9.2 Troubleshooting with display code
Problem Cause Solution
E1
• Drainage error, water is not fully drained
within 6 minutes
• Clean pump lter.
• Check drain hose installation.
E2
• Lock - error. • Shut the door properly.
E4
• Water level not reached after 8 minutes.
• Drain hose is self-syphoning..
• Make sure that tap is fully opened and water
pressure is normal.
• Check drain hose installation.
E8
• Water protective level - error.. • Contact the After sales service..
Many occuring problems could be solved by yourself without specic expertise. In case
of a problem please check all shown possibilities and follow below instructions before you
contact an after sales service. See CUSTOMER SERVICE.
WARNING!
▶ Before maintenance, deactivate the appliance and disconnect the mains plug from
the mains socket.
▶ Electrical equipment should be serviced only by qualied electrical experts, because
improper repairs can cause considerable consequential damages..
▶ A damaged power cable should only be replaced by the manufacturer, its service
agent or similarly qualied persons in order to avoid a hazard.
9.1 Information codes
Following codes are displayed only for information referring to the washing cycle. No
measures must be performed.
Code Message
1:25
The remaining wash cycle time will be 1 hour and 25 minutes
6:30
The remaining wash cycle time including chosen end-time delay will be 6 hours and 30 min-
utes
P--1/2/3
1/2/3 additional rinses are choosen (see FUNCTION BUTTONS „Extra rinse“).
End
The washing cycle is nished. The appliance shuts o automatically.
cLo1-
Function child lock is activated
LocI-
Door is closed because of high water level, high water temperature or spinning cy-
cle.
bEEP OFF
The buzzer is deactivated
bEEP ON
The buzzer is activated
SPEEd uP
Function “Sped up” is activated
Loading ...
Loading ...
Loading ...