Loading ...
Loading ...
Loading ...
REMOTE CONTROLLER
POWER
Operation starts when this button is pressed and stops when you press the button again.
FAN SPEED SELECTOR
For increased power while cooling,select a higher fan speed.
3 steps:High
Low.
Med
ON/OFF TIMER
OPERATION MODE SELECTOR
before the air conditioner will turn off.
b. Press the TEMP/TIME up or down arrow button to change the delay time from 1 hour
to 24 hours.
c. After 5 seconds, Timer OFF indicator light will remain on.Display will show the current
room temperature.
a. Press TIMER.Timer OFF indicator light will flash .Display will show remaining hours
a. Press MODE until you see the indicator light glow for the desired setting.
b. Choose Fan, Cool, Energy Saver or Dehum.
Fan—Only the fan runs. Press SPEED to select High, Med or Low fan speed. The
display shows the current room temperature.
Cool—Cools the room. Press SPEED to select High, Med or Low fan speed. Press the
TEMP/TIME up or down arrow button to adjust the temperature.
Energy Saver—Fan runs only when cooling is needed.Press SPEED to select High,
Med or Low fan speed.Because the fan does not circulate the room air continuously,
less energy is used, but the room air is not circulated as often.
Dehum—Dries the room. The air conditioner automatically selects the temperature.
Fan runs on Low speed only.
Loading ...
Loading ...
Loading ...