Loading ...
Loading ...
Loading ...
Prepare the Window for Installation
Positioning the Air Conditioner
NOTE:Attach curtains to the air conditioner before
placing the air conditioner in window.
1.Install top rail with four 13/32” screws.
2.Slide left-hand curtain assembly into left end of
top and bottom rails. Repeat for right-hand curtain
assembly.
3.14500-18000 BTU:Fasten curtain retainer strips
to the sides of the outer case with eight 13/32”
screws.
24000 BTU:Fasten curtain retainer strips to the
sides of the outer case with six 13/32” screws.
Assemble Curtain/Top Rail
A
B
C
D
A. Top channel
B.13/32” screws
C. 13/32” screws
D. Side curtains
B
A
1. Measure the width of the window opening.
2. Mark the center line on the inside windowsill.
A. Width of window opening
B. Center line
NOTES:
Handle the air conditioner gently.
Be sure your air conditioner does not fall out of
the opening during installation or removal.
The place where the power cord exits the air
conditioner should be no more than 4 ft
(122 cm) from a grounded outlet.
Do not block the louvers in the front panel.
Do not block the louvers on the outside of the
air conditioner.
A
B
C
NOTE: Your model may differ from the one shown.
A. Side curtain against window channel
B. Window sash behind top channel
C. Bottom channel in behind windowsill
Loading ...
Loading ...
Loading ...