Loading ...
Loading ...
Loading ...
Parts supplied:
Check that all parts are included in parts package.
Gather the required tools and parts before starting installation.
Read and follow the instructions provided with any tools listed here.
Tools needed
Phillips head screwdriver
Flat-blade screwdriver
Scissors
Level
Socket wrench and sockets
Tape measure
Cordless drill and 1/8” bit
Pencil
Pliers
Adjustable wrench
Location Requirements
A. Cabinet louvers
A
B
C
D
E
F
G
H
I
J
A. Top rail
B. Foam seal
C. Installation brackets (left and right)
D. Window lock bracket
E. 14500-18000 BTU:
” screws (12)
24000 BTU:
” screws (10)
F.
” bracket screws (6)
G. 14500-18000 BTU:
” screws (8)
24000 BTU:
” screws (10)
I. Left and right side curtains
J. Remote control
locknut(2)
IMPORTANT: Observe all governing codes and ordinances.
Check the location where the air conditioner will be installed.
Make sure you have everything necessary for correct installation.
The location should provide:
Grounded electrical outlet within 4 ft (122 cm) of where the
power cord exits the air conditioner.
NOTE: Do not use an extension cord.
Free movement of air in room to be cooled.
A large enough opening for the air conditioner. Installation
parts are supplied for double-hung windows.
Adequate wall support for weight of air conditioner. Air
conditioner weighs 100 lbs to 130 lbs (45.4 kg to 59.0 kg).
NOTE: Cabinet louvers must not be obstructed. Air must be able
to pass freely through the cabinet louvers.
A
Loading ...
Loading ...
Loading ...