Loading ...
Loading ...
Loading ...
192
9
08
Each press of the button, located at the end of the
wiper stalk , displays the different trip computer
information in succession, depending on the screen.
- the "vehicle " tab with:
the range, the current fuel consumption and the distance remaining to
the destination,
- the "1" tab (trip 1) with:
the average speed, the average consumption and the distance travelled
calculated over trip "1",
- the "2" tab (trip 2) with the same information for a second trip.
A FEW DEFINITIONS
Range:
displays the distance which can travelled with the remaining fuel
detected in the tank, based on the average fuel consumption over the last
few miles (kilometres).
This displayed value may vary signifi cantly following a change in the
vehicle speed or the relief of the route.
When the range falls below 20 miles (30 km), dashes are displayed. After
fi lling with at least 5 litres of fuel, the range is recalculated and is displayed
when it exceeds 60 miles (100 km).
If, whilst driving, dashes are displayed continuously in place of the digits,
contact a PEUGEOT dealer.
Current fuel consumption:
only calculated and displayed above 20 mph
(30 km/h).
Average fuel consumption:
this is the average fuel consumption since
the last trip computer zero reset.
Distance travelled:
calculated since the last trip computer zero reset.
Distance remaining to the destination:
calculated with reference to
the fi nal destination, entered by the user. If guidance is activated, the
navigation system calculates it as a current value.
Average speed:
this is the average speed calculated since the last trip
computer zero reset (ignition on).
Zero reset
When the required trip is displayed, press the control for more than
two seconds.
TRIP COMPUTER
Loading ...
Loading ...
Loading ...