Loading ...
Loading ...
Loading ...
34
Menu Functions
Brightness
Adjusts the brightness of the picture. When adjusting this control, the black areas of
the picture appear just as black and details in the dark areas are visible.
The higher the value, the brighter the
picture, while the lower the value, the
darker the picture.
The function is accessible through the remote control.
Contrast
Adjusts the degree of difference between dark and light areas in the picture. After
adjusting the Brightness value, adjust Contrast to set the peak white level.
The higher the value, the greater the
contrast.
The function is accessible through the remote control.
Color
Adjusts the color saturation level - the amount of each color in a video picture. Lower
settings produce less saturated colors; setting to the minimum value makes the image
black and white.
If the setting is too high, colors on the image will be overpowering, which makes the
image unrealistic.
Tint
Adjusts the red and green color tones of the picture.
The higher the value, the more greenish the picture becomes. The lower the value,
the more reddish the picture becomes.
Sharpness
Adjust to make the picture look sharper or softer.
The higher the value, the sharper the
picture becomes. The lower the
value, the softer the picture becomes.
The function is accessible through the remote control.
Advanced...
• Black Level
Sets the picture grayscale to 0 IRE or 7.5 IRE.
The grayscale video signal is measured in IRE units. In some areas which use NTSC TV
standard, the grayscale is measured from 7.5 IRE (black) to 100 IRE (white); however,
in other areas where PAL equipment or Japanese NTSC standards are used, the
grayscale is measured from 0 IRE (black) to 100 IRE (white). We suggest you to check
if the input source is with 0 IRE or with 7.5 IRE, and then make your selection
accordingly.
30 50 70
30 50
70
4712
Loading ...
Loading ...
Loading ...