Loading ...
Loading ...
Loading ...
2.
Make sure that the lug on the swingarm is
positioned in the slot on the brake caliper
bracket.
3.
Adjust the drive chain slack. 2 P. 69
4.
Install and tighten the rear axle nut.
Torque: 44 lbf·ft (59 N·m, 6.0 kgf·m)
5.
After installing the wheel, apply the brake
pedal several times, then check if the
wheel rotates freely. Recheck the wheel if
the brake drags or if the wheel does not
rotate freely.
If a torque wrench was not used for
installation, see your dealer as soon as
possible to verify proper assembly.
Improper assembly may lead to loss of
braking capacity.
20190626120438_31K0FA100_enu_BOOK Page 91 Wednesday, June 26 2019 12:09:25 JST
Tire Puncture u Removing Wheels
Troubleshooting
88
Brake caliper bracket
Swingarm
Slot
Lug
Loading ...
Loading ...
Loading ...