Loading ...
Loading ...
Loading ...
4.
Turn both adjusting bolts an equal
number of turns until the correct drive
chain slack is obtained. Turn the adjusting
bolts counterclockwise to tighten the
chain. Turn the adjusting bolts clockwise
to provide more slack.
Adjust the slack at a point midway
between the drive sprocket and the
driven sprocket.
Check the drive chain slack. 2 P. 68
5.
Check rear axle alignment by making sure
the chain adjuster index marks align with
the triangle marks.
Both marks should correspond. If the axle
is misaligned, turn the right or left
adjusting bolts until the marks are aligned
and recheck chain slack.
6.
Tighten the rear axle nut.
Torque: 44 lbf·ft (59 N·m, 6.0 kgf·m)
7.
Tighten the drive chain adjusting bolts
lightly.
8.
Recheck drive chain slack.
If a torque wrench was not used for
installation, see your dealer as soon as
possible to verify proper assembly.
Improper assembly may lead to loss of
braking capacity.
20190626120438_31K0FA100_enu_BOOK Page 73 Wednesday, June 26 2019 12:09:25 JST
Drive Chain u Adjusting the Drive Chain Slack
Maintenance
70
Loading ...
Loading ...
Loading ...