Loading ...
Loading ...
Loading ...
Installation
1.
Attach the side collars to the wheel.
2.
Position the wheel between the fork legs
and insert the front axle shaft from the
right side, through the wheel hub and
right fork leg.
NOTICE
When installing a wheel or caliper into original
position, carefully fit the brake disc between the
pads to avoid scratching them.
3.
Tighten the front axle nut.
Torque: 51 lbf·ft (69 N·m, 7.0 kgf·m)
4.
After installing the wheel, apply the brake
lever several times, then check if the
wheel rotates freely. Recheck the wheel if
the brake drags or if the wheel does not
rotate freely.
If a torque wrench was not used for
installation, see your dealer as soon as
possible to verify proper assembly.
Improper assembly may lead to loss of
braking capacity.
20190626120438_31K0FA100_enu_BOOK Page 88 Wednesday, June 26 2019 12:09:25 JST
Tire Puncture u Removing Wheels
Troubleshooting
85
Continued
Loading ...
Loading ...
Loading ...