Loading ...
Loading ...
Loading ...
4.
Remove the drive chain from the driven
sprocket by pushing the rear wheel
forward.
5.
Remove the rear axle shaft, right side
collar, left side collar and rear wheel.
u Support the brake caliper assembly so
that it doesn’t hang from the brake
hose. Do not twist the brake hose.
u Avoid getting grease, oil, or dirt on the
disc or pad surfaces.
u Do not push the brake pedal while the
brake caliper assembly is removed.
Installation
1.
To install the rear wheel, reverse the
removal procedure.
u
Take care to prevent the brake caliper
from scratching the wheel during
installation.
NOTICE
When installing a wheel or caliper into original
position, carefully fit the brake disc between the
pads to avoid scratching them.
20190626120438_31K0FA100_enu_BOOK Page 90 Wednesday, June 26 2019 12:09:25 JST
Tire Puncture u Removing Wheels
Troubleshooting
87
Continued
Left side collar
Drive chain
Rear axle shaft
Adjusting bolt
Loading ...
Loading ...
Loading ...