Loading ...
Loading ...
Loading ...
12
B. Place the floor sensor on the floor near the hot water tank.
Make sure the sensor is sitting flat on the floor near the hot water tank.
A. Connect the servo lead to the control box lead
STEP 5: SET UP THE SENSOR AND CONTROL UNIT
1. Line up the round and square
plugs on the control box lead to
the corresponding round and
square holes on the lead from
the servo.
2. Snap the leads into place.
3. Use the included wire ties to gather
the wires and stick them to the wall so
that they’re out of the way.
Clean the wall first. Then stick the
back of the wire tie to the wall. Use
the other wire tie closer to the control
box to gather the wires there as well.
Note: Additional wire ties are included
to help manage wires in other parts of
the installation.
Loading ...
Loading ...
Loading ...