Loading ...
Loading ...
Loading ...
20
To replace a light bulb, follow these steps:
1. Replace the light bulb only with Dacor part number
100429. See the page 22 for ordering information.
2. Disconnect the outdoor grill power cord from the elec-
trical outlet.
3. Hold your hand under the lens for support and gently
pry it loose using a spatula or table knife. Pull the lens
cover straight out.
4. Grasp the old bulb and pull it straight out of the
socket.
5. Using a glove, insert the new bulb into the socket.
6. To reinstall the lens, rst
line up the lens and the
light xture, with the cutout
toward the bottom. Gently
press the lens into its origi-
nal position.
7. Reconnect the power cord.
Care and Cleaning
Light Bulb Replacement
WARNING
• To avoid an electrical shock and fire hazard, be sure
to disconnect the outdoor grill power cord from the
electrical outlet and close the gas shut-off valve when
replacing the light bulb(s).
• To avoid personal injury, make sure the outdoor grill
and the light bulb(s) are cool before replacing the
light bulb(s).
• Always make sure the lens covers are in place when
using the outdoor grill. The lens covers protect the
bulbs from breakage.
• Replacing the lens cover without lining up the cutout
with the light socket will damage the light fixture.
• Do not use a screwdriver to remove the lens.
Light bulb replacement is considered to be a homeowner
maintenance operation. Your outdoor grill has halogen
lights to enhance the view inside the canopy. Each light
assembly consists of a removable lens cover and a 20
Watt 12 Volt halogen bulb, as well as the light xture
housing. If the light does not work, before replacing it,
please consult the Problem Solution Guide on page
22.
IMPORTANT
To increase bulb life, use a glove when handling the
bulb. Oils from your hand may reduce bulb life
.
Lens cutout
Back of Lens
Light Fixture Locations
Light fixture
Insert with lens cutout
on bottom
Bulb
Light
socket
Light Bulb Installation
Lens
Loading ...
Loading ...
Loading ...