Loading ...
Loading ...
Loading ...
Towing bracket device
In combination with the Parking System Plus
›
›
›
page 294, the camera image will cease to
be transmitted immediately when reverse
gear is disengaged or when the selector lever
is moved from the R position, and the optical
information provided by the Parking Aid sys-
tem will be displayed.
Also in combination with the system, the rear
assist image can also be concealed:
●
By pressing one of the Infotainment system
buttons on the display.
●
OR: By pressing the miniature vehicle that
appears on the left of the screen (which
switches to the full-screen mode of the Park-
ing System Plus's optical system).
If you wish to display the rear assist image
again:
●
Disengage reverse, or change the selector
lever's position, engage reverse again or
move the selector lever to position R.
●
OR: Press the RVC function button
1)
Meaning of the orientation lines
›››
Fig. 290
Side lines: extension of the vehicle (the
approximate width of the vehicle plus the
rear view mirrors) on the road surface.
End of the side lines: the area marked in
green ends approximately 2 m behind the
vehicle on the road surface.
Mid line: indicates a distance of approxi-
mately 1 m behind the vehicle on the road
surface.
Horizontal red line: indicates a safe dis-
tance of approximately 40 cm at the rear
of the vehicle on the road surface.
Parking manoeuvre
●
Place the vehicle in front of the parking
space and engage reverse gear (manual
gearbox) or move the selector to the R posi-
tion (automatic gearbox).
●
Reverse slowly, and turn the steering wheel
so that the side orientation lines lead towards
the parking space.
●
Guide the vehicle into the parking space so
that the side orientation lines run parallel to it.
1
2
3
4
Towing bracket device
T
o
wing br
acket device*
Introduction
The towing bracket device fitted to your vehi-
cle, be it f
actory-fitted or a genuine SEAT ac-
cessory, meets all the national technical and
legal requirements for towing.
Your vehicle is fitted with a 13-pin connector
for the electrical connection between the
trailer and the vehicle. If the trailer is equip-
ped with a 7-pin connector you can use the
corresponding adaptor, which is available as
a genuine SEAT accessory.
The maximum authorised towing load is 80
kg.
WARNING
●
Before each journey, mak
e sure that the
detachable ball joint is properly fitted and
secured in its housing.
●
If the detachable ball joint is not properly
fitted and secured, do not use it.
●
Do not use the towing bracket device for
towing if it is damaged or has missing parts.
»
1)
WARNING: the RVC function button will only be
activat
ed and available when the reverse gear is
engaged or the selector lever is set to position R.
301
Loading ...
Loading ...
Loading ...