Loading ...
Loading ...
Loading ...
Operating modes
Instructions for navigation
When the Infotainment system is unable to re-
ceive any data fr
om GPS satellites (due to a
dense tree canopy, underground car park),
navigation can still continue using the vehicle
sensors.
Possible limitations in navigation
In areas that are not or are only partially digi-
tised on the data storage device (e.g. insuffi-
cient definition of one-way streets and road
categories), the Infotainment system will still
attempt to provide route guidance.
Navigation area and updating navigation
data
Roads and streets are subject to constant
change (e.g. new roads, changes to street
names and building numbers). Therefore, if
the navigation data is not updated, then er-
rors or inaccuracies may occur during guid-
ance.
SEAT recommends updating navigation data
on a regular basis. Up to date navigation data
can be downloaded from www.seat.com or
acquired at a SEAT dealer.
Updating and using navigation da-
ta from an SD car
d
3 Only available for the model: Navi System
The Infot
ainment system always requires the
navigation data that is currently valid for this
unit in order to allow all functions to be used
in full. Using an old version may lead to errors
during navigation.
Updating navigation data
The current navigation data can be downloa-
ded in the internet at www.seat.com and stor-
ed in a SD card compatible with the unit.
Suitable SD Cards can be acquired at SEAT
dealerships.
The procedure is described on the internet at
www.seat.com.
Using navigation data
●
Insert the memory card
›››
page 206.
●
Do not remove the memory card while test-
ing. Wait for the testing icon to disappear.
If the inserted memory card contains valid
navigation data, the following message ap-
pears: “The source contains a valid
navigation database”. It is now possible to
navigate with the memory card data. When
the memory card is no longer needed by the
hardware, it will be prepared for removal
›››
page 206.
Note
●
The inserted memory car
d must be pre-
pared before it is ejected
›››
page 206.
●
Press the infotainment
›››
Fig. 200
1
button and then select the Settings con-
text t
o open the System settings menu.
●
Navigation is not possible without the SD
card.
●
Do not remove the memory card while
the navigation data is in use. This could
damage the memory card!
●
The navigation memory card may not be
used as memory for other files. The info-
tainment system will not recognise the files
saved.
●
SEAT recommends only using original
SEAT memory cards to use navigation data.
The use of other memory cards could limit
its operation.
Updating and installing navigation
dat
a
3 Only availabl
e for the model: Navi System Plus
The Infotainment system is equipped with an
internal navigation data memory. The re-
quired navigation data are already installed
on the system.
The Infotainment system always requires the
navigation data that is currently valid for this
unit in order to allow all functions to be used
»
213
Loading ...
Loading ...
Loading ...