Loading ...
Loading ...
Loading ...
Driving
switch off during the journey. Switch off the
system when star
ting off.
●
If the vehicle continues to move involun-
tarily after a driver intervention prompt,
brake the vehicle by applying the pedal.
●
If the dash panel displays a driver inter-
vention prompt, adjust the distance your-
self.
●
The driver should be ready to accelerate
or brake by him/herself at all times.
CAUTION
If you have the sensation that the radar
sensor is damaged, disconnect the ACC.
This will av
oid possible damage
. If this oc-
curs have it adjusted.
●
Repairs to the radar sensor require spe-
cialist knowledge and special tools. SEAT
recommends visiting a SEAT dealership for
this purpose.
Note
●
If the ACC system does not work as de-
scribed in this chapt
er, do not use it until it
has been checked by a specialised work-
shop. SEAT recommends visiting a SEAT
dealership for this purpose.
●
Maximum speed with the ACC activated
is limited to 210 km/h (130 mph).
●
When the ACC is switched on, strange
noises may be heard during automatic
braking cause by the braking system.
Symbols on the instrument panel
displ
ay and contr
ol l
amps
The speed reduction by the ACC
to maintain the dist
ance from the
vehicle in front is not sufficient.
Brake! apply the foot brak
e! Driver intervention
prompt.
The ACC is not currently availa-
ble.
a)
With the v
ehicle stationary, switch off the engine and
start it up again. Check the radar sensor visually
›
››
Fig. 271 (for dirt, ice or knocks). If it is still unavaila-
ble, refer to a specialised workshop to have the sys-
tem inspected.
a)
The symbol on the instrument panels with colour
displ
ay is in col
our
.
The ACC is active.
No vehicle is detected in front. The programmed
speed remains constant.
If the symbol is white: the ACC is
active.
A v
ehicle in front has been detected. The ACC ad-
justs speed and distance from the v
ehicle in front.
If the symbol is grey: ACC is inac-
tive (Standby)
The syst
em is switched on, but is not adjusting.
The lamp lights up green
The ACC is active.
Some control and warning lamps will light up
briefly when the ignition is switched on t
o
check certain functions. They will switch off
after a few seconds.
WARNING
Observe the safety warnings
›››
in Con-
trol and warning l
amps on page 123.
276
Loading ...
Loading ...
Loading ...