Loading ...
Loading ...
Loading ...
Servicing Your Windstar
335
*
[SV29600(ALL)01/93]
Make sure your suspension insulators and bumpers are not
missing or worn to avoid damage to your vehicle.
%
*
[SV29700(ALL)04/95]
Cleaning the Wheels
*
[SV29800(ALL)05/95]
Wash the wheels with the same detergent you use to wash your
vehicle’s body. Do not use acid-based wheel cleaners, steel wool,
abrasives, fuel, or strong detergents. These substances will
damage protective coatings. Use tar and road oil remover to
remove grease and tar.
*
[SV29900(ALL)04/95]
NOTE: Before going to a car wash, find out if the brushes are
abrasive.
*
[SV31300(ALL)05/95] Automatic Transaxle Fluid
[SV31400(ALL)08/94]
Under normal circumstances, you need to change the fluid at
30,000 miles (48,000 km) for normal operating conditions or
21,000 miles (34,000 km) for severe duty. However, if the
transaxle is not working properly (for example, slipping or
shifting slowly), or you notice some sign of fluid leakage, the
fluid level should be checked.
*
[SV31500(ALL)01/93]
It is best to check the transaxle fluid level at normal operating
temperature, after approximately 20 miles (30 km) of driving.
However, if necessary, you can check the fluid level without
having to drive 20 miles (30 km) to obtain a normal operating
temperature if outside temperatures are above 50˚F (10˚C).
*
[SV31600(ALL)01/93]
NOTE: If the vehicle has been operated for an extended
period at high speeds or in city traffic during hot
weather, or if it has been pulling a trailer, the engine
should be turned off for about 30 minutes to allow
the fluid to cool before checking.
File:wnsvs.ex
Update:Tue Mar 19 08:16:43 1996
Loading ...
Loading ...
Loading ...