Loading ...
Loading ...
Loading ...
156
% [FV09630(ALL)05/95] Anti-Theft System (if equipped)
*
[FV09635(ALL)05/95]
When armed, this system helps protect your vehicle against
break-ins or theft.
%
*
[FV09640(ALL)05/95]
When an unauthorized entry occurs, the system triggers and
will:
*
[FV09645(ALL)05/95]
■ flash the headlamps, parking lamps, and alarm indicator
lamp
*
[FV09650(ALL)05/95]
■ honk the horn
*
[FV09655(ALL)05/95]
■ disable the starting circuit to prevent the vehicle from being
started
%
*
[FV09660(ALL)05/95]
Arming the system
*
[FV09665(ALL)05/95] 1. Remove the key from the ignition. The hood must be closed
to arm the system.
*
[FV09670(ALL)05/95] 2. Open any door. The alarm indicator light will start flashing
to remind you to arm the system.
*
[FV09675(ALL)05/95] 3. Lock the doors by using the power door lock switch. The
alarm indicator light will now glow steadily.
[FV09680(ALL)05/95] 4. Close all doors. The alarm indicator light will then remain
on steadily for 30 seconds and then go out. When the light
goes out, the system is armed.
*
[FV09685(ALL)05/95]
NOTE: Be sure to close all doors completely. If not, the alarm
indicator light will remain on. Remember, your
anti-theft system is armed only after the alarm
indicator light remains on steadily for approximately
30 seconds after the last door is closed, and then goes
out.
*
[FV09690(ALL)05/95]
You can also arm the anti-theft system with the factory installed
remote entry system or the keyless entry system by following
this sequence:
File:wnfvs.ex
Update:Tue Mar 19 08:21:54 1996
Loading ...
Loading ...
Loading ...