Loading ...
Loading ...
Loading ...
266
[RE03000(ALL)02/95] 2. Let the dead battery charge for a few minutes and then start
the vehicle that has the dead battery. If the starter does not
crank, check for good, solid jumper cable clamp attachments.
It may take a couple of tries before your vehicle starts. If
your vehicle does not start after several attempts, you may
have a different mechanical problem.
*
[RE03100(ALL)03/95] 3. When both vehicles are running, let them idle for a few
minutes to charge the dead battery.
% [RE03200(ALL)02/95]
Take the jumper cables off in the following order:
[RE03300(ALL)02/95] 1. Remove the negative (s) end of the jumper cable from the
metallic surface in the engine compartment of the vehicle
that needed a jump-start.
*
[RE03400(ALL)03/95] 2. Remove the other end of the negative (s) cable from the
booster battery.
*
[RE03500(ALL)03/95] 3. Remove the positive (+) cable from the booster battery.
*
[RE03600(ALL)03/95] 4. Remove the other end of the positive (+) cable from the
vehicle that needed a jump-start.
% [RE03700(ALL)02/95]
After your vehicle is started, let it idle for a while to let the
engine “relearn” its idle conditions and drive it around for a
little while with all electrical accessories turned off, to let the
battery recharge. You may need to use a battery charger to
fully recharge the battery.
File:wnres.ex
Update:Tue Mar 19 08:18:21 1996
Loading ...
Loading ...
Loading ...