Loading ...
Loading ...
Loading ...
Latch the door.
Turn the Oven Temperature knob to
CLEAN.
Press the
START TIME ON/OFF
pad.
Press the
HOUR
and
MIN.
pads to set
the time cleaning will start.
When the
CLEAN
light flashes, and the
oven has completely cooled, slide the latch
handle to the left as far as it will go and
turn the Oven Temperature knob to
OFF
.
20
Using the self-cleaning oven.
(on some models)
Before a Clean Cycle
The range must be completely cool in order to set
the self-clean cycle.
We recommend venting with an open
window or using a ventilation fan or hood
during the first self-clean cycle.
Remove the shelves, broiler pan, broiler
grid, all cookware and any aluminum foil
from the oven.
The oven shelves can be self-cleaned, but
they will darken, lose their luster and
become hard to slide.
Soil on the front frame of the range and
outside the gasket on the door will need to
be cleaned by hand. Clean these areas with
hot water, soap-filled steel-wool pads or
cleansers such as Soft Scrub®. Rinse well
with clean water and dry.
Do not clean the gasket. The fiberglass
material of the oven door gasket cannot
withstand abrasion. It is essential for the
gasket to remain intact. If you notice it
becoming worn or frayed, replace it.
IMPORTANT:
The health of some birds is
extremely sensitive to the fumes given off
during the self-cleaning cycle of any range.
Move birds to another well ventilated room.
Wipe up heavy soil on the oven
bottom.
Make sure the oven light bulb cover
is in place and the oven light is off.
How to Set the Oven for Cleaning
Latch the door.
Turn the Oven Temperature knob to
CLEAN.
Clean cycle time is normally 4 hours and
20 minutes. On models with
COOK TIME
and
START TIME
pads, you can change the
clean time to between 3 hours and 5 hours,
59 minutes by using the
HOUR
and
MIN.
pads. The display will show the clean time
counting down.
When the
CLEAN
light flashes, and the
oven has completely cooled, slide the
latch handle to the left, and turn the
Oven Temperature knob to
OFF
. Never
force the latch handle. You may damage
the door lock.
To stop a clean cycle,
turn the Oven
Temperature knob to
OFF
. Wait until the
oven has cooled and unlatch the door.
How to Delay the Start of Cleaning
(on some models)
You may notice some white ash in the oven.
Wipe it up with a damp cloth after the
oven cools.
If white spots remain, remove them with a soap-
filled steel-wool pad and rinse thoroughly with a
vinegar and water mixture.
These deposits are usually a salt residue
that cannot be removed by the clean cycle.
If the oven is not clean after one clean cycle,
repeat the cycle.
■You cannot set the oven for cooking until
the oven is cool enough for the door to
be unlatched.
■While the oven is self-cleaning, you can
press the
CLOCK
pad to display the time of
day. To return to the clean countdown,
press the
COOK TIME ON/OFF
pad.
■If the shelves become hard to slide,
apply a small amount of vegetable oil
or cooking oil to a paper towel and wipe
the edges of the oven shelves with the
paper towel.
After a Clean Cycle
Never force the latch handle. Forcing the handle will damage the door lock mechanism.
Operating
Instructions
Safety InstructionsCare and Cleaning
Installation
Instructions
Troubleshooting Tips
Consumer Support
Loading ...
Loading ...
Loading ...