Loading ...
Loading ...
Loading ...
50
ENGLISH
19
When the amount of water needed for the rinse cycle has been com-
pletely dispensed, this icon on the side is displayed. Press the “
”
button to quit the descaling cycle.
GreenYellow
20
Press the “ ” button to prime the circuit.
21
The machine now carries out the warm-up and automatic rinse cycle to
prepare for product brewing.
22
Remove and empty the container.
23
Empty the drip tray and place it back.
24
The descaling cycle is now complete.
25
Remove the small white lter and replace the INTENZA+ water lter (if
tted) in the water tank. Reinsert the Automatic Milk Frother.
Note:
At the end of the descaling cycle, wash the brew group as described in the
“Weekly cleaning of the brew group” chapter.
The rinse cycles are performed in order to have the circuit cleaned with
a preset amount of water to ensure proper machine performance. If the
water tank is not lled up to MAX level, the machine might require three or
more cycles.
17
When the water tank is empty, remove the water tank, rinse it and ll it
up to the MAX level with fresh water. Place it back into the machine.
18
Empty the container back and place it back under both the steam/hot
water wand and the dispensing spout.
1
3
2
Loading ...
Loading ...
Loading ...