Loading ...
Loading ...
Loading ...
44
BEFORE YOU CALL
Solutions to Common Problems:
Before you call for service, review the following list. It may save you time and expense. Possible solutions are provided
with the problem listed.
Problem Cause / Solution
Entire appliance does not
operate.
Appliance not connected. Make sure power cord is plugged properly into outlet.
Check your fuse box or breaker box to make sure the circuit is active.
Electrical power outage. Check house lights to be sure. Call your local electric
company for service outage information.
Oven Problems
Poor baking results. Many factors affect baking results. Use proper oven rack position. Center food in the
oven and space pans to allow air to circulate. Preheat the oven to the set temperature
before placing food in the oven. Try adjusting the recipe's recommended temperature
or baking time. See
“Adjusting Oven Temperatures” on page 37 if you feel the oven is
too hot or too cool.
Flames inside oven or smoking
from oven vent.
Excessive spills in oven. Grease or food spilled onto the oven bottom or oven cavity.
Wipe up excessive spills before starting the oven. If flames or excessive smoke are
present when using broil, see
“Setting Broil” on page 27.
Oven smokes excessively when
broiling.
Incorrect setting. Follow the “Setting Broil” instructions on page 27.
Meat too close to the broil burner. Reposition the broil pan to provide proper
clearance between the meat and broil burner. Remove excess fat from meat. Cut
remaining fatty edges to prevent curling, but do not cut into lean.
Grease build up on oven surfaces. Regular cleaning is necessary when broiling
frequently. Grease or food splatters will cause excessive smoking.
F 11 Error Code If you get an F11 error, turn the power to the range off and wait 30 second to turn it
back on. Make sure the oven control panel is clean. Spills, grease, lots of steam when
opening the oven door, and residues from certain cleaners may cause this error.
Clean the control with some warm, soapy water and dry with a clean cloth. If the error
persists, call our help line
Oven control panel beeps and
displays any F or E code error.
Oven control has detected a fault or error condition. To clear the error, press the OFF
key on the control panel. Once the error code is cleared, try the bake or broil function.
If the F or E code error repeats, turn off the power to appliance, wait 5 minutes, and
then repower the appliance. Set the clock with correct time of day. Try the bake or
broil function again. If the fault recurs, press the OFF key to clear.
Oven portion of appliance does
not operate.
Be sure the regulator gas valve is turned to ON. See installation instructions.
The time of day is not set. The clock must be set in order to operate the oven. See
“Setting the Clock” on page 21.
Be sure the oven controls are set properly for the desired function. See “SETTING
OVEN CONTROLS” starting on page 20 and review instructions for the desired
cooking function in this manual or see “Entire appliance does not operate.” in this
checklist.
Loading ...
Loading ...
Loading ...