Loading ...
Loading ...
Loading ...
– 29 –
Care of your Microwave Oven
Note:
1. The oven should be cleaned regularly and any food deposits removed. Failure to maintain the oven
in a clean condition could lead to deterioration of the surface that could adversely affect the life of the
appliance and possibly result in a harzardous situation.
2. When it becomes necessary to replace the oven light, please consult a dealer to have it replaced.
3. After each time the unit is used it should be wiped down to remove any moisture that has accumulated
inside the cavity.
4. The appliance shall not be cleaned with a steam cleaner.
BEFORE CLEANING:
Unplug at socket of the oven. If impossible, leave
oven door open to prevent oven from accidentally
turning on.
AFTER CLEANING:
Be sure to replace the Roller Ring and Glass Tray
in the proper position and press Stop/Reset Pad to
clear the Display Window.
Inside of the oven:
Wipe with a damp cloth. Mild
detergent may be used if the
oven gets very dirty. The use
of harsh detergent or abrasives
is not recommended.
Glass Tray:
Remove and wash in warm
soapy water or in a dishwasher. If
grease accumulates, clean with a
nonabrasive nylon mesh scouring
pad and a non-abrasive cleanser.
Outside oven surfaces and
back vents.
Clean with a damp cloth. To
prevent damage to the operating
parts inside the oven, water
should not be allowed to seep
into ventilation openings.
Control Panel:
• May be covered with removable
protective fi lm to prevent
scratches during shipping.
Small bubbles may appear
under this fi lm. When this
happens, remove fi lm carefully.
(Hint - apply masking or clear
tape to an exposed corner and
pull gently to remove.)
• If it becomes wet, clean with a
soft, dry cloth. Do not use harsh
detergents or abrasives on the
Control Panel.
Roller Ring and oven cavity fl oor:
Wipe the bottom surface of the oven with mild
detergent water or window cleaner and dry. Roller
Ring may be washed in mild soapy water or
dishwasher. These areas should be kept clean to
avoid excessive noise.
Oven Door:
Wipe with a soft cloth when steam accumulates inside
or around the outside of the oven door. This may
occur when the microwave oven is operated under
high humidity conditions and in no way indicates a
malfunction of the unit or of microwave leakage.
Technical Specifi cations
Power Supply: 230 - 240 V, 50 Hz
Power Consumption*: 4.4 A 1000 W
Power Requirement: (Maximum) 7.5 A 1700 W
Output*: 1100 W
Outside Dimensions (W x H x D): 555 mm (W) x 304 mm (H) x 493 mm (D)
Oven Cavity Dimensions (W x H x D): 418 mm (W) x 228 mm (H) x 470 mm (D)
Overall Cavity Volume: 44 L
Glass Tray Diameter: Ø380 mm
Operating Frequency: 2450 MHz
Uncrated Weight: Approx. 14.3 k
g
Trim Kit (Australia and New Zealand only)
Model Number
NN-TK712SSQP
Outside Dimensions 596 mm (W) x 410 mm (H)
Cabinet Opening 600 mm (W) x 395 mm (H) x 533 mm (D)
* IEC Test Procedure
Specifi cations subject to change without notice.
As for the voltage requirement, the production month, country and serial number, please refer to the
identifi cation plate on the microwave oven.
F0003BQ60QP_OI_00_160531.indd 29F0003BQ60QP_OI_00_160531.indd 29 2016/8/24 8:19:352016/8/24 8:19:35
Loading ...
Loading ...
Loading ...