Loading ...
Loading ...
Loading ...
22
Oven Controls
Settings Recipe Recall
Use Recipe Recall to recall a bake, convection bake, convection
roast, slow cook, cook time, or a cook time with a Warm & Hold
added setting. This feature will not work with any other function.
One recipe can be saved for each oven.
To program the oven to begin baking immediately and record a
recipe (Bake at 425°F):
Always use pot holders or oven mitts when using
the oven. When cooking the oven interior, oven racks, and
cooktop will become very hot which can cause burns.
1. Press Upper Oven or Lower Oven.
2. Press Bake.
3. Press 4 2 5.
4. Press and hold START for at least 3 seconds until a beep
indicates that this recipe has been recorded for future
recall. If you do not wish to continue cooking at this time,
press STOP.
To begin baking using a stored recipe:
1. Place food in oven.
2. Press Upper Oven or Lower Oven where the recipe has
been saved.
3. Press Bake.
4. Press START.
5. The temperature (and cook time, if programmed) is
recalled, and the oven will begin cooking the recorded
recipe.
Restoring Factory Default Settings
Your appliance was set with predetermined (default) oven
control settings. Over time, users may have made changes to
these settings. The following options may have been modified
since the appliance was new:
• 12 or 24 hr display mode
• Continuous bake or 12 Hour Energy Savings mode
• Silent or audible control
• Oven temperature display (Fahrenheit or Celsius)
• Oven temperature adjustments (UPO)
• Meat probe
• Recipe Recall
To restore oven control to factory default settings:
If you choose to restore any of the options to a
factory default setting using this method, all of the above user
settings will be restored to the factory default settings. This
includes the oven temperature offset that will reset to (0) zero.
1. Press and hold 7 on numeric keypad until acceptance tone
sounds (about 3 seconds). Three beeps will sound immedi-
ately. Ignore them. PS will appear in the display.
2. Press . The control has been reset with the default
settings.
Adjusting Oven Temperatures
Your appliance has been factory calibrated and tested to ensure
accurate baking temperatures. For the first few uses, follow your
recipe times and temperature recommendations carefully. If you
think the oven is cooking too hot or too cool for your recipe
times, you may adjust the control so the oven cooks hotter or
cooler than the oven temperature displayed.
The oven temperature may be increased as much as +35°F
(+19°C) or decreased -35°F (-19°C) from the factory calibrated
settings.
To increase (+) or decrease (-) the oven temperature by 20°F:
1. Press Upper Oven or Lower Oven.
2. Press and hold Bake until the control produces an audible
tone (about 3 seconds). The factory offset temperature of
0 (zero) should appear in the display.
3. Enter 2 0 using numeric keys.
4. To offset the oven by -20°F, press Self Clean to toggle to
the minus (-) setting.
5. Press to accept change.
Important note:
• Oven temperature adjustments will not change the Broil or
Self Clean function temperatures.
• Do not use oven thermometers such as those found in
grocery stores to check the temperature settings inside your
oven. These oven thermometers may vary as much as 20°F
to 40°F degrees from actual temperatures.
• The oven temperature adjustment may be made if your
oven control is set to display temperatures in °C. Minimum
and maximum settings for Celsius range from plus (+)19°C
to minus (-) 19°C.
Loading ...
Loading ...
Loading ...