Loading ...
Loading ...
Loading ...
19
Safety Instructions
Safety Instructions
Pay attention to the following points regarding installation and handling of the projector.
• If the projector will not be used for a long period of time, be sure
to remove the power plug from the power outlet to ensure safety.
Failure to do so presents a risk of fire if dust accumulates on the
plug or outlet.
• Parts of the cabinet around and above the exhaust vents may
become hot during projection. Touching these areas during
operation could cause burns to the hands. Pay particular
attention in preventing young children from touching these parts.
Additionally, do not place any metal objects around or above the
exhaust vents. Due to the heat from the projector, doing so could
cause an accident or personal injury.
• Do not place the projector where it may be exposed to oily smoke
or steam, such as near kitchen counters or humidifiers. Doing so
may cause fire or electric shock.
• Do not place any heavy objects on top of the projector or sit /
stand on it. Pay particular attention to prevent small children from
doing so. The projector may be knocked over and this could
result in damage or a personal injury.
• Do not place the projector on an unstable or slanted surface.
Doing so may cause the projector to fall or be knocked over and
could result in a personal injury.
• Do not place any objects in front of the lens
during projection. Doing so could cause a fire.
• Presenters in front of the projector should
stand where the light does not seem too bright,
and where their shadow does not fall on the screen.
• The projector is provided with a lens shift function to move the
lens up, down, left, and right using the motor. Do not touch the
lens while it is moving. Touching the lens when it is moving may
result in personal injury.
• Before replacing the lens unit, wait at least one hour after the
projector is turned off to allow the projector to cool thoroughly.
Failure to do so could result in a burn or injury.
When handling the lamp, pay attention to the following points.
• Lamps are more likely to rupture once the lamp replacement
message has been displayed. Replace the lamp with a new one
as soon as possible.
• Be sure not to handle the lamp immediately after it has been
used. Be sure to switch off the power and wait for approximately
1 hour for the lamp and the projector to cool down sufficiently.
Failure to do so could result in a burn or personal injury due to
heat from the lamp or projector.
• Be prepared by keeping a spare lamp.
• Dispose of used mercury lamps in accordance with local
regulations.
Loading ...
Loading ...
Loading ...