Loading ...
Loading ...
Loading ...
English - 18
English - 19
06 TECHNICAL SPECIFICATIONS
technical specifications
SAMSUNG strives to improve its products at all times. Both the design specifications and
these user instructions are thus subject to change without notice.
Model CM1099/CM1099
*
Power source
230 V ~ 50 Hz
Power consumption
Microwave 1600 W, 7 A
Output power
230 V : 1050 W (IEC-705)
(5 power levels including defrost)
Operating frequency 2450 MHz
Cooling method Cooling fan motor
Dimensions (W x H x D)
Outside
Oven cavity
517 x 297 x 412 mm
336 x 225 x 349 mm
Volume 26 liter
Weight
Net
Gross
17.5 kg
19.0 kg
Error Items Code Error Beep Cause
Thermistor
Short Error
E22 One long beep
for 2sec.
Thermistor Sensor which is supposed
to sense the temperature of the cavity
inside does not work properly.
(Thermistor Sensor short)
Remedy
Unplug the power cord and wait for more than 10 seconds.
Plug the power cord again. If the symptom persists, contact the
nearest service centre.
Temperature of
exhaust air too
High Error
E3 One long beep
for 2 sec.
The oven cavity gets too hot due to
excessive operation with no load or
small load, or due to some blocking
materials around the Air Filter or Air
Exhaust at the back of the oven.
Remedy
Open the oven door and check if 1) the oven has been operating
with no load or too small load, 2) the air filter is placed in a
wrong position, or 3) any blocking materials exist around the
Air Exhaust. Cool down the oven (for approx. 30 min) under the
normal temperature. The oven is back to normal when the error
code “E3” disappears and “ON” appears again in the display
window.
Unplug the power cord, remove the blocking materials around
the ventilation openings, cool down the oven (for approx. 30 min)
suciently, plug the power cord in again and check if the error
code appears again.
If the symptom persists even when the oven is cooled down
suciently, contact the nearest service centre.
HVT-I Power
Error
E41 One long beep
for 2 sec.
The circuitry inside the oven is not
working correctly.
Remedy
Unplug the power cord and wait for 10 seconds.
Plug the power cord in again and check if the error code “E41”
appears again. If the symptom persists, contact the nearest
service centre.
Error Items Code Error Beep Cause
HVT-II Power
Error
E42 One long beep
for 2 sec.
The circuitry inside the oven is not
working correctly.
Remedy
Unplug the power cord and wait for 10 seconds.
Plug the power cord in again and check if the error code “E42”
appears again. If the symptom persists, contact the nearest
service centre.
EEPROM Error
E5 One long beep
for 2 sec.
Memory IC (EEPROM IC) is not
working correctly.
In this case, other features except for
memory function work properly.
(You can operate the oven manually.)
Remedy
Press CANCEL button one or more times and try to start a
memory heating. If the error code “E5” persists, contact your
nearest service centre.
For any codes not listed above, or if the suggested solution does not solve the
problem, contact your local SAMSUNG Customer Care Centre.
CM1099A_XEU_DE68-04031D-02_EN_160629.indd 19 2016-06-29 �� 2:55:37
Loading ...