Loading ...
Loading ...
Loading ...
21
Dryer Controls and Settings
Express
Select this timed cycle to quickly dry a
small load made up of just a few items.
It provides approximately 25 minutes of
tumbling including a cool down period.
Timed Dry
Select a timed drying cycle for any load
using one of the preset cycles of 15, 30,
60, or 90 minutes. The dryer will continue
to heat throughout the cycle until the nal
cool down period.
Air Dry
Select this cycle for loads that require air
drying only. No heat will be used with this
setting. This setting should be used for dry
items such as items containing feathers,
down, foam rubber, plastics, or rubber-
like materials; to refresh clothing, stued
animal, pillows, or blankets; and to dust
draperies.
Drying Cycle Settings
Drying Temperature (Dry Temp)
Select the temperature setting most
suitable for each load. To protect fabrics,
not all temperatures are available with
every cycle. If an unavailable temperature
setting is selected by the user, the nearest
available temperature will be substituted.
High
Recommended for durable fabrics and
towels.
Normal
Recommended for most cotton fabrics.
Low
Recommended for delicate fabrics.
Drying Cycle Indicator Lights
The drying cycle
indicator lights
provide information
during the dry
cycle.
The Close Dryer
Door advisory LED
will illuminate if the
dryer door is open.
Fully close the dryer door before starting
the dryer. The dryer will not operate with
the door open.
Drying Cycle Controls
(Start, Pause, and Cancel)
START
Press Dryer START|PAUSE
button once to begin the
drying cycle. The unit will
emit one beep before the
drum begins to rotate.
PAUSE
Press Dryer START|PAUSE button while
the dryer is running to pause the drying
cycle. Opening the door with a cycle
running will also pause the cycle. Two
beeps will emit from the unit. Allow
the drum to come to a complete stop
before reaching inside. Press the Dryer
START|PAUSE button while paused to
restart the drying cycle.
CANCEL
Press the Dryer CANCEL button to cancel
the drying cycle. Wait for the drum to
come to a complete stop before reaching
inside.
NOTE
Air Flu setting does not use heat and
WILL NOT illuminate any of the Dry
Temp LED lights.
Loading ...
Loading ...
Loading ...