Loading ...
Loading ...
Loading ...
9
GEAppliances.com
Preparing for Vacation
For long vacations or absences, remove food
and unplug the refrigerator. Move the
refrigerator control to the 0 (off) position and
clean the interior with a baking soda solution
of one tablespoon (15 ml) of baking soda to
one quart (1 liter) of water. Leave the doors
open.
Set the icemaker power switch to the O (off)
position or move the feeler arm to the STOP
(up) position (depending on model) and shut
off the water supply to the refrigerator.
If the temperature can drop below freezing,
have a qualified servicer drain the water
supply system (on some models) to prevent
serious property damage due to flooding.
Preparing to Move
Secure all loose items such as grille, shelves
and drawers by taping them securely in place
to prevent damage.
Be sure the refrigerator stays in an upright
position during moving.
Some models have only one light.
Freezer Compartment Dome Light (on some models)
CAUTION:Light bulbs may be hot.
Unplug the refrigerator.
The bulb is located behind a light shield at
the back of the freezer compartment. To
remove, squeeze the top and bottom of the
shield and pull the shield off.
After replacing with an appliance bulb of
the same or lower wattage, replace the
shield.
Plug the refrigerator back in.
Replacing the light bulbs.
Setting either or both controls to 0 (off) does not remove power to the light circuit.
Refrigerator Compartment—Upper Light
CAUTION:Light bulbs may be hot.
Unplug the refrigerator.
The bulbs are located at the top of the
compartment near the opening.
Replace with an appliance bulb of
the same or lower wattage.
Plug the refrigerator back in.
Light shield
Loading ...
Loading ...
Loading ...