Loading ...
Loading ...
Loading ...
About the controls on the refrigerator.
Control Settings
Initially, set the control(s) at 5 (some models have
only one control). Allow 24 hours for the temperature
to stabilize.
Several adjustments may be required. Adjust the
control(s) one increment at a time and allow 12
hours after each adjustment for the refrigerator to
reach the temperature you have set.
Setting the refrigerator control to 0 stops cooling in
both the freezer and refrigerator compartments but
does not shut off electrical power to the refrigerator.
The freezer control (on some models) has no effect on electrical power to the refrigerator.
Control settings will vary based on personal preferences, usage and operating conditions, and may
require more than one adjustment. Factors that affect temperature include the amount of food in the
refrigerator or freezer, the frequency of door opening and the temperature of food when it is placed
in the refrigerator.
Installing the Filter
Cartridge
If you are replacing the
cartridge, first remove the
old one. To open the
cartridge cover, push in
where indicated and the
cover will drop down.
Remove the cartridge by
slowly rotating it to the left.
A small amount of water
may drip down.
CAUTION:
If air
has been trapped in the system,
the filter cartridge may be
ejected as it is removed. Use
caution when removing.
Apply a month and year
sticker to the new cartridge
to remind you to replace it
in six months.
Position the cartridge inside
the cartridge holder and
slowly rotate the cartridge
to the right until it stops.
When the cartridge is
properly installed, you will
feel it “click” as it locks into
place. The blade on the end
of the cartridge should be
positioned vertically. Do not
overtighten.
Close the cartridge cover.
Run 1
1
/2 gallons from the
dispenser to clear the
system and prevent
sputtering. See To Use the
Dispenser section.
NOTE: A newly-installed water
filter cartridge may cause water
to spurt from the dispenser.
About the water filter. (on some models)
Water Filter Cartridge
The water filter cartridge is located
inside the cartridge holder in the
back upper right corner of the
refrigerator compartment.
NOTE: Some models ship with the
filter bypass plug in place of the
filter cartridge. The filter bypass
plug needs to be removed before the filter cartridge is installed. Keep
the filter bypass plug for future use.
When to Replace the Filter
The filter cartridge should be replaced every six months or earlier if
the flow of water to the icemaker and dispenser decreases.
Filter Bypass Plug
You must use the filter bypass plug when a replacement filter
cartridge is not available. The dispenser and the icemaker will not
operate without the filter or filter bypass plug.
Replacement Filters
To order additional filter cartridges in the United States, visit our
Website, GEAppliances.com, or call GE Parts and Accessories,
1.800.661.1616.
Filter Model GSWF
Suggested Retail Price $34.95 USD
Customers in Canada should consult the yellow pages for the
nearest Mabe Service Center
.
4
Consumer Support Troubleshooting Tips Operating Instructions Safety Instructions
Installation
Instructions
(on some models)
Loading ...
Loading ...
Loading ...