Loading ...
Loading ...
Loading ...
Installation
25
EN
5.6 Adaptation to different types of gas
If other types of gas are to be used, the
nozzles must be replaced and the primary
air must be adjusted. In order to replace the
nozzles and adjust the burners, the hob top
must be removed.
Removing the hob top
1. Remove the grids from the hob.
2. Remove the flame-spreader crowns and
relative burner caps.
3. Pull the knobs and the knob bezels
upwards to remove them.
4. Remove the screws fastening the top and
the plates corresponding to each burner
zone.
Between knob and the knob bezel
there is a spring that is not shown in
the figure.
Loading ...
Loading ...
Loading ...