Loading ...
Loading ...
Loading ...
33
OPERATION
ENGLISH
IMPORTANT NOTE
Turn the oven mode knob to the Off position to
cancel the Meat Probe function at any time. To avoid
breaking the probe, make sure food is completely
defrosted before inserting.
CAUTION
•
Always use an oven mitt to remove the
temperature probe. Do not touch the broil
element. Failure to obey this caution can result
in severe personal injury.
•
To avoid damage to the meat probe, Do
not use tongs to pull on the probe when
removing it.
•
Do not store the meat probe in the oven.
Recommended Probe Temperature Chart
Doneness Probe Temp.
Beef, Lamb and Veal
Rare
Medium Rare
Medium
Well Done
130 °F (54 °C)
140 °F (60 °C)
150 °F (66 °C)
160 °F (71 °C)
Pork
Well Done 170 °F (77 °C)
Poultry
Breast, Well Done
Thigh, Well Done
Stuffing, Well Done
170 °F (77 °C)
180 °F (82 °C)
165 °F (74 °C)
Remote Start
If the appliance is registered on a home Wi-Fi network,
this function starts preheating and then holds the
temperature for up to an hour (including preheating
time). If the appliance is not registered on the network,
“OFF” appears in the display.
Follow the instructions
on page 36 to register the appliance on the network.
Set the oven mode knob to the Remote Start position
to use the function.
For Model : LSE5615 For Model : LSE5613
Model : LSE4611
Setting Remote Start
1
Open the oven door to make sure the oven is
empty and ready for pre-heating. Close the oven
door.
2
Within 30 seconds of closing the door, turn the
oven mode knob to select Remote Start. If more
than 30 seconds passes before you initiate
Remote Start, “door” appears in the display. If this
occurs, open and close the door and try again.
3
When ON appears in the display, the Remote
Start function is ready to use.
4
Follow the directions in the smart phone
application to set the cook mode, temperature,
and run time (preheating time plus holding time).
NOTE
Do not place food in oven before or during
Remote Start run time.
Remote Start is disconnected in the following
situations:
•
Remote Start is never set up in the smart phone
app.
•
The Remote Start status is "OFF" or "door".
•
Remote Start experiences a problem during
operation.
•
The Remote Start function cannot be started
when the oven door is open. A beep alerts you
to shut the door.
Loading ...
Loading ...
Loading ...